EN
STRAIGHT-SIDE DOUBLE CRANK PRESS(Y2N)
H-type frame is consist of three parts:crossbeam,uprights and base,tightened by four tensile screw rods,with high rigidity and less deformation.
- Overview
- Related Products
Standard accessories
| -Hydraulic Over-load Protector | -Programmable controller |
| -Electric lubrication device | -Air blowing material joints |
| -Digital die height indicator (unit:0.1MM) | -Air source Receptacle |
| -Balance Device | -T-Mobile Station |
| -Rotary cam switches | -Independent electrical control box |
| -Crank Angle Indicator | -Maintenance Tool Box |
| -Circulating centralized lubricating oil installations | -Inverter |
| -Electromagnetic stroke counter | -Anti Vibration Device |
| -Second Fall Protection Device | -Power plug |
Optional accessories
| -Die Cushion | -Safety light sensor | -Base screws and base plate |
| -Slide Knock-out Device | -Security and safety latch stopper | -Security and safety ladder rack |
| -Die Room Light | -Presetting counter(6 digits) | -Quick Die Change Device |
| -Main motor reversing device | -Load detection Device | |
| -3-digit counter cutting | -Misfeed Detection Device |
Technical parameter
Model |
|
Y2N-400 |
Y2N-500 |
Y2N-630 |
|||
Capacity |
Ton |
400 |
500 |
630 |
|||
Rated Tonnage Point |
mm |
7 |
9 |
8 |
12 |
8 |
12 |
Stroke Length |
mm |
300 |
400 |
300 |
400 |
300 |
400 |
Stroke Per Minute |
SPM |
20~40 |
20~30 |
15~35 |
15~25 |
20~35 |
15~25 |
Die Height |
mm |
600 |
700 |
600 |
800 |
700 |
900 |
Max.Upper Die Weight |
kg |
3200 |
4000 |
3500 |
4800 |
4000 |
5500 |
Slide Adjustment |
mm |
150 |
200 |
250 |
|||
Slide Area |
mm |
2700×1300 |
3400×1400 |
3000×1300 |
3600×1400 |
3600×1400 |
4000×1500 |
Bolster Area |
mm |
2700×1300 |
3400×1400 |
3000×1300 |
3600×1400 |
3600×1400 |
4000×1500 |
Bolster Thickness |
mm |
200 |
220 |
250 |
|||
Side Opening |
mm |
1000×600 |
1100×700 |
1000×600 |
1100×700 |
1100×700 |
1200×800 |
Working Height |
mm |
760 |
750 |
800 |
|||
Main Motor |
KW×P |
45×4 |
55×4 |
75×4 |
|||
Slide Adjustment motor |
HP×P |
3.7×4 |
5.5×4 |
7.5×4 |
|||
Frame Structure |
Ton |
Three parts/one piece |
Three parts |
Three parts |
|||
Functions Features
-H-type frame is consist of three parts:crossbeam,uprights and base,tightened by four tensile screw rods,with high rigidity and less deformation.
-Two crank shaft structure and Left-Right layout,large center distance between two connecting-rods,strong load deviation resistant capability suitable for continuous die.
-Combined pneumatic friction clutch brake,low noise,large clutch torque,small braking angle and long service life -Eight-side long rectangle of slide,with hight moving precision.
-Hydraulic overload protection device,to reliable use and flexible action. -Oil lubrication system.
-Optional accessories(air cushion and movable working table)are available according to the customer's needs.
